Electric Stage Hoist For Theater Show

Send Inquiry
Electric Stage Hoist For Theater Show
Details
Electric Stage Hoist For Lifting Lighting Truss Line Array Speaker Concert Theater Show
✅Closed-loop synchronous lifting with position feedback.
✅Anti-jitter soft start & soft stop for live visual effect.
✅Built-in load cell real-time load monitoring, individual load alarm.
✅Tour-grade quick-plug modular wiring architecture.
✅Adaptive low-headroom upside-down rigging profile.
✅Phase loss, over-voltage & over-temperature triple power anomaly protection.
✅Self-diagnostic fault code output for fast on-site troubleshooting.
✅Variable speed curve programmable via controller.
Category
Electric Stage Hoist
Share to
Description

Products Application

 

✅ Immersive tunnel dynamic screen lifting system

✅ Water show & fountain scenic element hoisting

✅ Automated museum exhibition rotating & lifting artifacts display

✅ Theme park dark ride scene prop motion rigging

✅Virtual production LED volume wall & ceiling panel adjustment

✅ Fashion runway kinetic installation for fashion week show

✅ Indoor ski resort & ice rink event temporary rigging

✅ Rooftop pop-up event & sky kinetic art installation

✅ Broadcasting studio multi-camera & backdrop automated movement

✅ Auction hall & high-end gallery art lifting display

 

Function of Stage Electric Chain Hoist

 

 

✅ DMX512 & sACN frame-synced motion control

✅ Anti-sway algorithm for pendulum scenic loads

✅ Real-time rigging log & runtime data export

✅ Standby hot-swap communication bus

✅ Manual jog fine-tune mode with micro-step

✅ Group master-slave dynamic reassignable mapping

✅ Chain slack detection & automatic slack take-up

product details
 
product-1279-1706

Low-profile compact die-cast alloy enclosure

The electric stage hoist adopts a compact, streamlined monoblock casing engineered for professional touring and fixed installation environments. Its outer shell is formed with high-strength die-cast alloy, treated with anti-scratch matte powder coating that resists scuffs, stage haze residue, fingerprint marks and minor impact abrasion from frequent rigging and transport.

Redundant dual-brake setup with separated feedback loops

This electric stage hoist is equipped with an independent dual braking safety system, consisting of a main servo holding brake and a secondary fail-safe backup brake, which work in a mutually independent monitoring loop rather than simple parallel installation.

product-1279-1706

 

Product Specifications

 

Electric Stage Hoist Theatre Hoist - Standard Specifications

 

Model: SNN-S1-0.5

Capacity: 0.5 t

Test load: 0.6 t

Protection level: IP55

Classification FEM/ISO: 2m/M5

Lifting speed: 26 m/min

Motor: 2.0 kw

Load chain: Φ6.3×19 mm

Load chain falls: 1

Net weight: 47.5 kg

Chain weight/M: 0.86 kg

 

Model: SNN-S1-1

Capacity: 1 t

Test load: 1.2 t

Protection level: IP55

Classification FEM/ISO: 2m/M5

Lifting speed: 16 m/min

Motor: 2.0 kw

Load chain: Φ8×24 mm

Load chain falls: 1

Net weight: 51 kg

Chain weight/M: 1.38 kg

 

 

Model: SNN-S1-2

Capacity: 2 t

Test load: 2.4 t

Protection level: IP55

Classification FEM/ISO: 2m/M5

Lifting speed: 6 m/min

Motor: 3.0 kw

Load chain: Φ8×24 mm

Load chain falls: 2

Net weight: 52 kg

Chain weight/M: 1.38 kg

product-15-15

Fully in-house manufactured and load-tested

product-3648-2736

In-house fabrication of critical semi-finished hoist blanks

We maintain a complete in-house production line for semi-finished stage hoist parts, covering core mechanical machining, casting, forging and precision processing of key components including alloy chain sprockets, brake housings, gear sets and load-bearing brackets.

product-2796-2098

Core drive sub-assemblies pre-built as semi-finished units

Our core movement assemblies are pre-assembled as semi-finished modules in our workshop, covering the gearbox unit, brake assembly, chain drive sprocket and bearing sets. These critical motion parts are pre-fitted, aligned and bench-tested before final casing integration.

 
product-1440-1080

Integrate all pre-tested sub-modules into a complete hoist

The final overall assembly integrates the pre-tested movement module, alloy casing, G80 lifting chain, wiring harness, sensor units and control components into one complete hoist unit. Following standardized assembly SOP, technicians mount each sub-module in sequence, secure fasteners to specified torque values and route all power and signal cables neatly inside the housing.

product-2928-3904

Verify cross-system coordination for stable live-show operation

After full machine assembly, each electric stage hoist undergoes comprehensive project-level performance validation, simulating real working conditions of theatre performances, kinetic art installations and touring rigging projects. This test regime goes beyond simple no-load checks and covers the full set of working parameters required for on-site stage application.

product-2928-3904

Operate under partial load and rated load for sustained periods

Every finished electric stage hoist is subjected to a continuous burn-in test after passing functional performance inspection. This long-duration running test is designed to simulate the prolonged cyclic duty cycles encountered during rehearsal runs, multi-day festivals and long-run theatre shows.

product-2098-2796

Complete set display: hoist, accessories and certification documents

Our finished electric stage hoists are neatly arranged for final visual check and presentation after passing all performance, burn-in and safety tests. Each unit is thoroughly cleaned to remove machining oil, dust and test residue, then inspected for surface coating integrity, marking clarity and overall appearance quality.

About Us

 

Based in Hangzhou, Hangzhou New Vision is a specialized supplier focusing on lifting and material handling equipment, with more than ten years of experience serving global clients in theatre, touring rental, industrial and construction sectors. We maintain close linkage with our well-equipped manufacturing base, covering independent component machining, modular assembly, full-condition testing and customized production of stage hoists, electric chain hoists, stackers and other lifting gear.

 

product-738-395
product-722-382
product-730-359
product-730-375

 

FAQ

 

Q1:Will gear lubricant leak after long touring transport?

A1:We use stable high-viscosity stage-grade grease. Proper sealing prevents oil leakage during frequent shipping and vibration.

 

Q2:Can the hoist memorize preset cue positions after power reboot?

A2:Yes. It retains saved cue positions after power loss, ready to resume scene programs quickly.

 

Q3:Is there a way to lock local operation to avoid on-site misoperation?

A3:Yes. Local control can be locked remotely, only responding to DMX/sACN commands during the show.

 

Q4:What noise level can we expect near the stage during slow movement?

A4:Low-noise transmission module, suitable for quiet theatre and live recording scenarios.

 

Q5:Does the hoist record operation logs for rental fleet management?

A5:It records running cycles, alarm records and load events for your rental asset tracking.

 

Q6:Can we adjust the lifting speed separately for different scene cues?

A6:Speed is programmable individually for each cue via the control system.

 

 

 

Whether you need a standard Electric Wire Rope Hoist with Motorized Trolley or a custom-engineered lifting system, Hangzhou New Vision has the capacity, experience, and quality control to deliver.

 

Ready to Configure Your Hoist?

Tell us your required capacity, lifting height, voltage, and beam size - we'll send a tailored quotation within 24 working hours.

 

Request a Free Quote

 

Hot Tags: Electric Stage Hoist For Theater Show, China Electric Stage Hoist For Theater Show manufacturers, suppliers, factory, 110v electric hoist, 12v lifting hoist, electric cable hoist winch, electric hoist 500kg price, electric wire rope hoist 1 ton, hoist 250 kg

Send Inquiry