Products Description
This overload protected electric stage hoist is purpose-engineered for professional entertainment rigging, live concerts, theatre productions, touring rental events and fixed venue truss flying systems. Different from standard industrial hoists, every safety logic, motion curve and surface treatment is tuned for the unique non-negotiable demands above audience areas, complying with EN17206 D8+ rigging standards.
Application of Stage Electric Chain Hoist
✅ Theatre & opera scenic flying: automated backdrops, drapes and movable stage props with cue-smooth motion.
✅ Virtual production & broadcast studio: LED volume walls, broadcast lighting and camera track rigging.
✅ Outdoor festivals & runway events: fast-build touring truss systems, resistant to wind-induced shock loads.
✅ Museum immersive art & kinetic installations: repeatable slow aerial movement for exhibits above visitors.
✅ Theme park live shows: animated flying props and scenic transformation for all-day cyclic performances.
✅ Auditorium & church multi-purpose venues: retractable acoustic panels, projection screens and speaker arrays.
✅ Film location shooting rigging: temporary lighting grids and aerial camera support systems.
Product shown

Outer Housing & Visual Treatment
The casing of this overload protected electric stage hoist is purpose-built for professional entertainment rigging environments, balancing mechanical protection, stage optical requirements and on-site handling durability, rather than adopting ordinary industrial surface design.
Redundant Dual Brake Safety Mechanism
This dual braking safety system is built to meet EN17206 D8+ entertainment rigging requirements, designed for overhead flying applications where personnel may be present beneath suspended loads. It is not simply two brakes connected in parallel on one control circuit; the two brakes operate on independent mechanical and electrical safety channels.


High-Tensile G80 Alloy Lifting Chain
This stage hoist adopts G80 high-strength alloy steel lifting chain, specially customized for entertainment rigging overhead flying, rather than ordinary G80 chains for general industrial hoists. The raw material is premium alloy steel with precise heat treatment, delivering high tensile strength, outstanding fatigue resistance and low ductile deformation under repeated cyclic lifting loads, which is critical for theatre, touring rental and theme park long-cycle performance use.
Supporting Tour Flight Case
This supporting aviation case is tailor-made for our overload protected electric stage hoist, specially designed for touring rental companies that frequently transport hoists between theatres, festivals, TV studios and event venues. Different from generic instrument cases, its internal layout is customized according to the outline of the stage hoist, chain bag, remote controller, cables and spare parts.

Product Specifications
Working Load Limit: 0.25t / 0.5t / 1t / 2t for selection
Motor duty: S3 intermittent high-cycle for repeated inching
Load chain: G80 high-tensile alloy steel, EN818-7, safety factor ≥8:1
Lifting speed: 2–4 m/min, variable speed optional
Power supply: 110V/220V/380V, 50/60Hz, single/3-phase customizable
Ingress protection: IP66, dust & splash resistant
Mounting way: Inverted overhead rigging
Safety configuration: Dual redundant brake, slack chain detection, overload clutch, limit switches
Control mode: Wired pendant / wireless remote / DMX512 synchronous control
Noise level: ≤60dB under full load
Compliance: CE, BGV D8 / D8+
Customizable items: Lifting height, control mode, logo, touring flight case
Built & Tested in Our Own Factory

Production of semi-finished stage
Semi-finished production is the core intermediate process that transforms raw alloy steel, cast blanks and electrical components into qualified stage hoist sub-assemblies, following dedicated rigging quality standards stricter than standard industrial hoist production. All semi-finished parts are processed with traceable batch codes for EN17206 D8+ compliance.

Pre-installed semi-finished movement components
The pre-installed semi-finished movement assembly covers the core power transmission, braking and load-bearing moving parts of the stage hoist, pre-assembled and bench-tested before entering final assembly. This modular prefabrication process is specially optimized for entertainment rigging, requiring higher stability and fault tolerance than standard industrial hoist drive units.

Overall assembly of the entire machine
The overall assembly is the final integration workstation that combines pre-tested movement modules, G80 alloy lifting chain, control system, housing, wiring harness and auxiliary accessories into a complete stage hoist. Assembly follows EN17206 D8+ entertainment rigging quality specifications, with step-by-step checkpoints to lock safety performance before factory testing.

Overall project performance testing
Overall performance testing is the final factory validation procedure for the assembled stage hoist before delivery, carried out in strict accordance with EN17206 D8+ entertainment rigging requirements. It goes far beyond simple static load testing for general industrial hoists, simulating the real dynamic working conditions encountered during rehearsals, live shows and outdoor touring events.

Burn-in test
Burn-in test is a continuous long-duration running screening procedure for finished stage hoists after comprehensive performance validation. Different from short functional spot checks, this accelerated aging test exposes the hoist to cyclic working loads to reveal latent defects that may only emerge after repeated use, which is critical for rental fleets facing back-to-back rehearsal and show schedules.

Finished product display
Finished product display presents the fully inspected, burn-in screened stage hoist after passing all factory validation procedures. Every unit shown is in delivery-ready condition, built and tested in compliance with EN17206 D8+ entertainment rigging standards for overhead flying applications.
About Us
Hangzhou New Vision Trading Co., Ltd., founded in 2014 and based in Hangzhou, China, is a professional exporter and integrated solution provider focused on lifting and material handling equipment for global clientsnewvisionm.... With more than ten years of export experience, we specialize in electric hoists, chain hoists, stackers and the high-spec overload protected electric stage hoists for entertainment rigging, which fully comply with EN17206 D8+ standards for theatre, concert, festival and broadcast flying systems.




FAQ
Q1:Is this stage hoist fully D8+ compliant for overhead flying where performers or audience are underneath?
A:Yes. It is designed and tested strictly to EN17206 D8+ for overhead rigging with personnel below. It adopts dual independent fail‑safe braking channels, separate redundant limit switches, dynamic shock-load overload protection and full batch traceability. Every unit passes burn-in and simulated shock load testing, not only static load inspection.
Q2:What is the difference between your stage hoist and normal industrial electric hoist?
A:Ordinary industrial hoists are built for static workshop lifting. Our stage hoist is optimized for live performance touring: anti-glare matte housing, zero oil-leak sealing, shock-load overload response, high-cycle fatigue resistance, upright/inverted dual mounting, plus power-on self-check function. All safety interlocks will alarm and lock movement once abnormality detected.
Q3:Can the hoist handle wind-induced sway and sudden snatch load on outdoor festival trusses?
A:Yes. Unlike simple static overload protection, it supports dynamic load monitoring. The system responds instantly to transient snatch loads caused by wind sway or fast cue lifting. The G80 stage-grade alloy chain and dual brake system are validated under cyclic shock load during factory burn-in.
Q4:Does the non-dripping gearbox still require regular oil refilling for long touring use?
A:No. The gearbox is pre-filled with long-life special lubricant and sealed with labyrinth sealing structure. Under normal operating conditions, it does not need routine oil refilling in its design service life, which avoids oil contamination to LED screens, lighting and soft drapes.
Q5:Can I swap the whole pre-assembled movement quickly on site without re-calibration for rental fleet maintenance?
A:Yes. The drive movement is a modular pre-tested unit with fixed factory calibration. When maintenance is needed, you can directly replace the whole movement module. No on-site gear gap or brake torque re-calibration is required, greatly shortening downtime between shows.
Q6:Will the matte casing reflect spotlight and cause lens flare during broadcast / XR virtual production?
A:No. The housing uses special low-reflection matte RAL9005 coating developed for broadcast and virtual production. It suppresses stray light reflection under spotlights, so it will not create bright flare points in camera footage or XR capture.
Whether you need a standard Electric Wire Rope Hoist with Motorized Trolley or a custom-engineered lifting system, Hangzhou New Vision has the capacity, experience, and quality control to deliver.
Ready to Configure Your Hoist?
Tell us your required capacity, lifting height, voltage, and beam size - we'll send a tailored quotation within 24 working hours.
Hot Tags: Overload Protected Electric Stage Hoist, China Overload Protected Electric Stage Hoist manufacturers, suppliers, factory, 120 volt hoist with wireless remote, 3 ton hoist price, beam trolley electric hoist, electric hoist 500kg price, electric hoist 500kg with trolley, electric wire rope hoist 1 ton