D8 Standard Electric Stage Hoist 0.5t 1t 2t

Features: 

1 D8 / D8+ safety classification 

2 Dual redundant brake mechanism 

3 Primary & backup upper/lower limit switches 

4 Friction‑clutch overload cut‑off device 

5 EN818‑7 certified high‑tensile load chain 

6 Forged swivel safety hook with latch 

7 Matte black anti‑reflective housing 

8 Low‑noise helical gear drive, ≤65dB under full load 

9 Light‑weight die‑cast aluminum alloy frame 

10 Integrated textile chain storage bag

11 5‑pocket precision chain guide wheel 

12 Variable‑speed & group‑synchronous lifting option 

13 Galvanized anti‑rust chain option 

Technical Parameters

Product Name: Electric Stage Chain Hoist

Safety Grade: D8 / D8+ Stage Safety Standard

Load Capacity: 500kg -2000kg 

Lifting Height: 3-30m (Customizable)

Lifting Speed: 2.5-4m/min

Chain Standard: EN818-7 G80 Alloy Chain

Voltage: 220V-440V 50/60Hz 1/3 Phase

Protection: IP54/IP55

Brake Type: Single / Dual Redundant Brake

Installation: Upright & Inverted Mountable

Certification: CE ISO

Optional Function: VFD Variable Speed, Flight Case, Synchronous Lifting Control

FAQ

Q1: What kind of limit switches are installed on your D8 stage hoist motor?

A1: We adopt double‑stage mechanical limit switches, upper over‑travel limit and lower over‑travel limit. They act as secondary protection besides the overload clutch, preventing the chain from over‑winding or fully unwinding.

Q2: Can your D8 hoist motor work with third‑party stage controllers?

A2: Our standard control interface follows common industry wiring definition. It can connect to most mainstream stage controllers, but signal matching and wiring check are required before formal use. We suggest testing on site first.

Q3: What surface treatment is applied to the D8 hoist housing?

A3: Matte black electrostatic spraying. Anti‑glare for stage lighting environment, scratch‑resistant and anti‑corrosion, will not produce light reflection during performance.

Q4: What chain speed tolerance for the D8 stage hoist motor?

A4: Speed tolerance is ±10% under rated load. Speed will slightly rise under no‑load condition, which is normal for this type of stage hoist and does not affect safety performance.

Q5: Is voltage drop a problem for long control cable runs?

A5: Long cables may cause voltage drop and affect motor performance. If the cable length exceeds 30 meters, we recommend using thicker gauge cables or installing a local power supply near the hoist.