Description

Technical Parameters

product-750-439

4WD Rough Terrain Forklifts are engineered to excel in challenging terrains and demanding outdoor setings. Renowned for their ugged design and superior capabilities,4WD rough terrain forklifts are tailored to provide exceptional performance and versatlity across a spectrum of industrial and outdoor applications.

Optimized heat dissipation

The introduction of an optimized heat dissipation path significantly improves efficiency by 30%. This design upgrade, coupled with a larger heat sink, effectively alleviates potential overheating issues, ensuring stable performance even under high load or long-term operation.

Closed tire fender design

The improved closed tire fender design provides protection against dirt and debris from entering the interior of the forklift. This improvement not only keeps internal components clean, but also reduces wear on key components, thereby increasing the service life and reliability of the forklift.

product-600-235

Improved air filtration system

The newly installed air filtration system is rationally located and equipped with higher-grade filters to effectively prevent dust and pollutants from entering the air system. This advanced filtration design significantly improves the air quality in the cabin and creates a healthier working environment.

product-600-393

Driver-centric design

The raised steering wheel improves operating convenience and provides a more ergonomic and comfortable driving experience. In addition, the larger operating space and better accessibility facilitate easy entry and exit, thereby improving the overall comfort of the operator and reducing fatigue during long-term use.

product-600-280

Rough Terrain Forklift Specification

General	1	Type				4WD			2WD
	2	Model				R4D18	R4D25	R4D35	R2D18	R2D25	R2D35
	3	Power type				Diesel
	4	Optional type				A3/B3/E3/H3(2WD)/Y3
	5	Rated capacity			kg	1800	2500	3500	1800	2500	3500

	6	Load centre			mm	500

Characteristic & Dimension	7	Free lift height			mm	165	165	170	165	165	170
	8	Fork size		L×W×T	mm	1070×100×35	070×122×40	1070×125×45	1070×100×35	1070×122×40	1070×125×45

	9	Fork regulating range		Min./max	mm	200-1310	250-1310	250-1500	200-1310	250-1310	250-1500

	10	Mast tilt angle		F/R	Deg	10°/12°	10°/12°	10°/12°	10°/12°	10°/12°	10°/12°
	11	Front overhang			mm	580	580	595	580	580	595
	12	Rear overhang			mm	605

	13	Min.ground clearance(Bottom of mast)			mm	220
	14	Overall dimensions	Length to face fork (without fork)		mm	3070	3070	3085	3070	3070	3085
	15		Overall width		mm	1450	1450	1600	1557	1557	1600

	16		Mast lowered height		mm	2230	2230	2325	2230	2230	2325

	17		Mast extended height (with backrest)		mm	4170	4170	4300	4170	4170	4300
	18		Overhead guard height		mm	2260	2260	2280	2260	2260	2280

Performance	19	Turning radius(outside)			mm	3080			2859

	20	Min right angle aisle width (add load length and clearance)			mm	2630	2630	2690	2680	2680	2690
	21	Speed	Travel(Laden/Unladen)		km/h	19/20	19/20	18/19	19/20	19/20	21/22
	22		Lifting(Laden/Unladen)		mm/sec	540/560	540/560	440/460	540/560	540/560	440/460

	23		Lowering(Laden/Unladen)		mm/sec	440

	24	Max.Drawbar pull(Laden)			KN	38			17
	25	Max.Gradeability(Laden)			%	50	50	45	20	20	16

	26	Tyre		Front		12-16.5-12PR	12-16.5-12PR	14-17.5-14PR	12-16.5-12PR	12-16.5-12PR	14-17.5-14PR

	27			Rear		10.0/75-15.3			27×10-12-12PR
	28	Tread		Front	mm	1125	1125	1250	1250	1250	1250
	29			Rear	mm	1198	1198	1198	1205	1205	1205
	30	Wheelbase			mm	1880
	31	Self weight			kg	4465	4850	5460	4115	4500	5180
	32	Weight Distribution	Laden	Front	kg	5465	6600	7750	5145	6000	7700
	33			Rear	kg	800	750	1200	770	1000	980
Weight	34		Unladen	Front	kg	2015	2180	2500	1865	1810	2070
	35			Rear	kg	2450	2670	2960	2250	2690	3110
	36	Battery	Voltage/Capacity		V/Ah	12/90
	37	Transmission	Manufacture			China
	38		Stage	F/R		2/1			1/1

	39	Operation pressure(For attachments)			MPa	18.1	18.1	20.5	18.1	18.1	20.5

Mast Specification

MAST		TYPE	LIFTING HEIGHT ON FORK (mm)	OVERALL HEIGHT MAST LOWERED(mm)	FREE LIFT ON FORKS (mm)		MAST TILTING ANGLE FRONT/REAR	CAPACITY AT MAX.HEIGHT(Kg)
					WITH Bracket	WITNOUT Bracket		WITHOUT SIDE SHIFT CARRIAGE	WITH SIDE SHIFT CARRIAGE
Wide View2 stage mast	M330	1.8T	3300	2380	165	165	10/12°	1800	1600
		2.5T		2380	165	165	10/12°	2500	2300
		3.5T		2475	170	170	10/12°	3500	3300
	M350	1.8T	3500	2485	165	165	10/12°	1800	1600

		2.5T		2485	165	165	10/12°	2500	2300
		3.5T		2575	170	170	10/12°	3500	3300
	M400	1.8T	4000	2780	165	165	10/12°	1800	1600
		2.5T		2780	165	165	10/12°	2500	2300

		3.5T		2875	170	170	10/12°	3400	3200
	M450	1.8T	4500	3030	165	165	10/12°	1500	1300
		2.5T		3030	165	165	10/12°	2200	2000
		3.5T		3125	170	170	10/12°	3100	2900
Full free 3 stage mast	TFM400	1.8T	4000	2075	893	1338	10/12°	1800	1600
		2.5T		2075	893	1338	10/12°	2500	2300
		3.5T		2200	895	1340	10/12°	3400	3200
	TFM435	1.8T	4350	2200	1018	1463	10/12°	1800	1600
		25T		2200	1018	1463	10/12°	2400	2200

		3.5T		2325	1020	1466	10/12°	3000	2800
	TFM470	1.8T	4700	2315	1133	1578	10/12°	1650	1450
		2.5T		2315	1133	1578	10/12°	2100	1900
		3.5T		2440	1135	1580	10/12°	2800	2600

	TFM500	1.8T	5000	2450	1268	1716	6/6°	1500	1300
		25T		2450	1268	1716	6/6°	1900	1700
		3.5T		2575	1270	1715	6/6°	2600	2400
	TFM600	1.8T	6000	2800	1618	2063	6/6°	800	600
		2.5T		2800	1618	2063	6/6°	1200	1000

		3.5T		2925	1620	2065	6/6°	1900	1700
	TFM650	1.8T	6500	3015	1833	2278	6/6°	500	300
		2.5T		3015	1833	2278	6/6°	700	500
		3.5T		3140	1835	2280	6/6°	1300	1100